LED lighting controller for LED strip

4-zone controller for LED strip management

The controller with remote control (the remote control is necessary for the controller to work – you can find it in our online shop) allows you to control the lighting of 1 to 4 independent LED zones (each zone has one receiver). Multiple lighting circuits can be connected to a single zone of the remote. The control unit needs to be connected to the LED power supply.

LED lighting controller for LED strip Specification:

• Power supply: 12/24V DC,
• Number of zones supported: maximum 4 zones,
• Power: 10A,
• Degree of protection: IP20 (indoor use),
• Communication method with remote control: 2.4 GHz WiFi radio,
• Colour management: no,
• Dimming/illumination function: yes,
• Brightness adjustment range: 0 ~ 100%

Assigning lighting to a zone on the remote control:

Switch off the power supply to the receiver in the first programmable zone,
Restart the switched-off receiver with the selected zone illuminated and press the “I” (on) button on the remote control for the selected zone for 3 seconds,
If the zone connection is successful, the light flashes 3 times.

Switching off the lights in a specified zone:

We disconnect the receiver power supply from the zone we want to disconnect,
Restart the disconnected receiver and press the “I” (on) button on the remote control 5 times quickly within 3 seconds in the selected zone,
If the zone disconnection is successful, the light flashes 6 times,
When using multiple receivers, it is possible to group several zones with lighting (one or more receivers can be connected to one of the four zones on the remote control).

See other products in our online shop.